Activated Sludge Process a Biological Treatment of Industrial Effluent / Sewage (presented by GTS PROJECTS)

 


Activated sludge process is a Biological Treatment Process to treat the Industrial effluent or sewage to remove the organic matters (BOD, COD, TSS) present using Bacterial Micro-Organisms and Oxygen (for respiration) by means of biological decomposition/degradation.

Activated Sludge is the mixture of Bacterial Microorganisms and suspended solids. The bacterial culture is cultivated in the treatment process to decompose the organic matters into carbon dioxide, water, and other inorganic compounds.

The typical activated sludge process has following basic components:

1) A Bio Reactor Tank in contain bacterial microorganisms are kept in suspended condition in contact with effluent water (which have to be treated), aerated (for respiration)

2) Clarifier tank (sedimentation tank) for solid- liquid separation

3) Sludge recirculation system for returning activated sludge settled at conical bottom of clarifier and sent back to the inlet of aeration tank for continuous inoculation.

There are many variants of activated sludge processes, including variations in the aeration method and the way the sludge is returned to the process.

Activated sludge process is an efficient process for removal of BOD, COD, TSS and nutrients.

Parameters to be monitored for successful daily operation.

SVI (Sludge Volume Index),

MCRT (Mean Cell Residence Time),

F/M (Food to Microorganism) ratio,

MLSS (Mixed Liquor Suspended Solids)

MLVSS (Mixed Liquor Volatile Suspended Solids)

DO (Dissolved oxygen), nitrogen, phosphate,

TSS (Total Suspended solids), BOD (Biochemical oxygen demand), and COD (Chemical oxygen demand).

RAS (Returning activated sludge flow rate back to aeration tank as continuous recirculation)

WAS (Wasting Excess activated sludge as given as blowdown/purging to sludge dewatering units in order to remove the decomposed/biodegraded solids)

Design Considerations of ASP

Volume of aeration tank, Cross section area of clarifier, quantity estimation of air (source of oxygen) to be passed in the aeration tank and required power consumption for the blowers/aerators, flowrate and discharge pressure/head of transfer pumps and sludge recirculation pumps, MLSS, MLVSS, SVI, MCRT and the characteristics/parameters (BOD, COD, TSS etc) of feed effluent and required reduction of treated/clarified overflow water and Post Disinfection and Filtration systems.

Thanks & Regards

G.Thirugnanam

GTS PROJECTS

18, Ambal Nagar,

Near V.G Rao Nagar,

Ganapathy, Coimbatore- 641006

Phone: +91 9843030427

Email: enviroindia@gmail.com, 

info@gtsprojects.in

Website: www.gtsprojects.in

 

Popular posts from this blog

GTS PROJECTS’s Retrofitted Emission Control System for DG Set (Diesel generator)

Image
   Why GTS PROJECTS’s Retrofitted Emission Control Equipment (Wet Scrubber System for DG Set) Required? “The Emission including Particulate matters due to operation of Generators set has also been identified as one of the sources of air pollution in Tamilnadu. There is a plan for a national level target of 30% reduction of PM 2.5 and PM10 concentration in the Ambient Air under the National Clear Air Program(NCAP). To Achieve the same TN Govt have taken an initiative to reduce the emissions of Generator sets used by the people in Tamilnadu. TN Govt have requested all the people who are using generators using 125kVA and above to fix Retrofit Equipment or a device to reduce the emissions from the Diesel Generator sets. GTS PROJECTS’s Retrofitted Emission Control System for DG Set GTS PROJECTS’s Retrofitted Emission Control System  is the device to remove emissions from the Diesel Generator engine exhaust flue gas. Retrofits can be very effective at reducing emissions, eliminatin
Read more

GTS PROJECTS - FLASH MIXERS, AGITATORS, CLARI-FLOCULATORS, TUBE SETTLERS

Image
We GTS PROJECTS manufacture, supply, installation and commissioning of FLASH MIXER and AGITATOR iin varies sizes and capacity for Chemicals preparation and floculation/ coagulation in Water Treatment and Industrial Effluent treatment plants We GTS PROJECTS have successfully supplied and installed one of our product TUBE SETTLER MEDIA in CLARIFIER of WATER TREATMENT PLANT.. Thanks & Regards G.Thirugnanam GTS PROJECTS 18,Ambal Nagar, Near V.G Rao Nagar, Ganapathy, Coimbatore- 641006 Phone: 9843030427 Email: enviroindia@gmail.com, info@gtsprojects.in Website: www.gtsprojects.in/ brochures/ .
Read more

Wet Scrubber

Image
With the intent to effectively prevent the air pollution, GTS Projects India P Ltd manufacture and supply superior quality air pollution control systems. Precision designed, these systems are used in diverse industries all across the globe. Use of sophisticated technology and engineering expertise enables us to offer them as per the demands of our clients.SCRUBBER SYSTEMS  GTS PROJECTS INDIA P LTD offer a comprehensive range of WET SCRUBBER systems, which are designed by us using cutting edge technology. Available in standard as well as customized specifications, these systems meet the varied requirements of air handling applications in various industries like: Pharmaceutical Industries, Power Plants, Foundries, Chemical Industries. GTS Projects India P Ltd have fabricated and installed CHIMNEY/EXHAUST PIPING for process exhaust hot air We GTS PROJECTS have manufactured and  installed WET SCRUBBER SYSTEM (Air pollution control
Read more